Author Archives: Dibash Adhikari

I thought using the texture will show the nice outline of the picture. But this is not possible in small brick wall. although i had used the letter posco in the brick wall to make the texture. The outcome are much-more in contrast form than real. the values are need to put carefully and changeContinue reading “using photo to do mapping in the brick wall,”

the pattern design will listed below. File link 2.File link 3. File link 4. File link 5. File link 6. File link 7. File link 8. File link 9. File link 10. File link 11. File link. 12. File link. 13. File link 14. File link: 15. File link:

I have to make different wall pattern, by using rhino and grasshopper. the height of the wall is 2 meter and length of the wall should be 1 meter. the brick size is 220, 110, 65 mm as length width and height respectively. Since the maximum length of the brick wall to be designed isContinue reading “making different wall pattern:”

To make the different shape of the brick wall, first i make the surface, the surface was made by two different sets of curve points. the height of the wall, the smoothness of the curve points, length of the wall, amount of bending in the wall, length of wall offset from the axis line canContinue reading “making the brick wall:”

after making the wall i want to make the path flow of the robot for each brick, Since i can increase the number of brick, height of wall, size of brick. the path to reach each brick will also changed accordingly. In the below picture, i make 1 layer of brick, with height 900 mm.Continue reading “Programming for making wall and the robot path diagram”

So, although i had done the same work through the grasshopper, i want to do it through the rhino-python. i am learner in programming, i also copied some glow of the code to make the brick wall with the size of 220,110 and 55. with the code, i only have to input wall reference lineContinue reading “Using rhino python to create brick wall continue 2”

i want to make a brick wall by using rhino python. the python editor in rhino is not user friendly, so i searched any alternative method. now i can use VS code directly to make any meshes and blocks in the rhino python. but in the part of making wall, i divide line for aContinue reading “using rhino python to create brick wall”

In this practice i make a sequence for the robot arm to make its path. First i create all the path for each brick. The robot follow the path to go there and again follow different path to return in its original position. First i made a grasshopper sequence to make a English bond brick.Continue reading “Robot arm simulation for Automatic Brick Wall Construction in Rhino by using Taco plugin”

I followed the tutorial below to make a pick and place of the box in the robot studio. my work is not responding like it should have as in the tutorial. i got the two error. Those are following: 50024: Corner path failure Description Task: T_ROB1 Corner path executed as stop point due to someContinue reading “pick and place following tutorial and fail.”